Oregon 21BPX066E MICRO-CHISEL chain .325 - 66 Drive Links - 0.058" (1.5mm) Gauge« back
Oregon 21BPX Chain to suit ONLY chainsaws that require a .325" Pitch and 0.058" (1.5mm) Gauge Chain with the same number of drive links in the title above.
Lightweight smooth fast cutting chain for professionals who use .325”-pitch chainsaws.
Gauge: 0.058" (1.5mm)
File Size: 3/16" (4.8mm)
Micro-Chisel® cutters have small-radius working corners that cut fast and are easy to sharpen.
Bumper drive links reduce kickback.
Vibe-Ban™ chassis design reduces vibration 25% or more at the handles.
Lubrilink™ tie straps help keep oil where it is needed-on the chain.
Lubriwell™ oil holes in bumper drive links help carry oil around the full length of the guide bar’s groove.
Top plate witness mark makes accurate sharpening easier.
Recommended for saws of 38cc to 58cc and bars from 11” to 20” (28 to 50cm).
PLEASE NOTE: The number of drive links, often referred to as drive teeth, which fit into the groove running around your chainsaw bar, is crucial, so please make sure your count the number of drive teeth before ordering your chain and match it to the number of drive teeth specified in this listing title.
See image below to identify drive teeth:
This listing is for chainsaws that require a .325" Pitch and 0.058" (1.5mm) Gauge Chain ONLY. If this listing does not match your current chain specification or you are just not sure what chain is on your chainsaw and you need to determine the chain for your machine then check out the Selector Guide link below.
ALL CUTTING CHAINS CAN KICK BACK, which may result in severe personal injury to the chain saw operator or bystanders. Operate your chain saw safely. Read all warnings in your chain saw operator’s manual.
We often cut packaging and repackage so single blades can easily pass through a standard letterbox with a flatter profile.